How to operate an electric stacker

1. Driving
Before driving the vehicle, check the working condition of the brakes and the pump station, and ensure that the battery is fully charged. Hold the joystick with both hands and force the vehicle to slowly drive towards the working cargo. If you want to stop, use the handbrake or footbrake to stop the vehicle
2, unloading
(1) Keep the fork perpendicular to the shelf, approach the shelf carefully and insert it into the bottom of the pallet
(2) Rewind the stacker to let the forks move out of the pallet
(3) Raise the fork to the required height, slowly move to the pallet to be unloaded, and at the same time ensure that the fork can easily enter the pallet and the goods are in the safe position of the fork
(4) Raise the fork until the pallet is lifted from the rack
(5) Slowly step back in the channel
(6) Slowly lower the cargo while ensuring that the fork does not touch the obstacle during the lowering process
CAUTION: Steering and braking operations must be slow and careful during cargo lift.
3, stacking
(1) Keep the goods low and approach the shelf carefully
(2) Lift the goods to the top of the shelf plane
(3) Slowly move forward, stop when the goods are above the shelf, put down the pallet at this point and pay attention that the fork does not exert force on the shelf under the goods to ensure that the goods are in a safe position
(4) Back slowly and make sure the pallet is in a free and firm position
(5) Lower the fork to the position where the stacker truck can travel
4, safety facilities
(1) Main switch: power main switch
(2) Foot brake: reliable parking brake
(3) restrictor valve: control the speed of descent
(4) Pressure limiting valve: control load
(5) Protection net: protect the driver
5. Prohibited items
(1) It is forbidden to operate Semi-Electric Stackers after drinking
(2) Overloading, uneven stacking of goods, and flatness are prohibited
(3) Stride operation is prohibited
(4) Parking on ramps or steps is prohibited